Bärenfels Schreiber-Bogen

Starting a build on the Schreiber-Bogen Bärenfels castle. I do not know how long this will stretch out. Lots of stuff going on now.



There are minimal written and graphic instructions.

Quote:

Tips for Construction Before the parts are cut out, the folding lines (broken lines) are scratched. One can use a thin knitting-needle for this. Normally the folds are made to the back. Broken lines marked with an X are folded to the front. For cutting one uses a pair of scissors and a knife, where the blade can be broken into segments when it gets blunt (cutter). As glue use an all-purpose adhesive or wood-glue. The model is constructed in the order of the black numbers. Red numbers show which parts are stuck together or onto each other. A -•-•-•- line shows the outline which has to be stuck together. These lines mustn’t be confused with the folding lines.

Quote:

Close Part 1 with the help of 1a first at the walls and then at the roof. Close Part 2 to an octagon in the upper half and attach to the corner of 1. Close 2a and put onto 2. 2b forms the pointed roof. Glue Oriel 3 to the narrow side of the building. Put Chimneys 4 and 5 onto the roof ridge and cover with 4a and 5a.

Part 1 & 1a


Part 1 & 1a together


Step one complete


Something I do when I remember is run a pencil over those dashed fold lines to hide them. I do not always remember, though.:rolleyes::)