Greetings All, I've trolled enough the threads and now i'll lay my soul bare with my first posted build. I decided after much practice to build the 1/35 model by TEKZ_8 from Peri paperhobby. I've taken some liberty in modifying bits and used all the tricks that I have read and tried to make a decent go at the kit. Unfortunately I did not take photos right from the start.
The initial photos show the cab and body. I decided to use a blue plastic as the glass for the cab, as the thickness does lend itself to a blue colour. I also double printed and used the exterior as an interior surface. One of the most difficult (so to date) I found were the slats, need to work on those.
The initial photos show the cab and body. I decided to use a blue plastic as the glass for the cab, as the thickness does lend itself to a blue colour. I also double printed and used the exterior as an interior surface. One of the most difficult (so to date) I found were the slats, need to work on those.
Aucun commentaire:
Enregistrer un commentaire