Hi,
here a little kit I just got with my last order. I wanted to do something simple for ones, so here it is : 40's Armoured railway car Ob-3 by gpm in 1:25, with lasercut. By the way, kit cover shows bp1 when the lasercut is ob-3
So it's basically an armoured box on top of a railway car with 2 t-26 turrets, plus 2 more 12.5mm on the side.
How much ? kit is around 11.5€ as lasercut. Both for 20€
1) kit
Kit present itself in classic Gpm, A4 paper, 180g (0.22mm) Model is really simple - but still nice details - length is 28cm
* Instruction in polish
* Few colours pictures of a model
* 3 pages of diagrams, good size. Model is really simple. So far no complain
* 6 pages for parts plus some more on back of instruction (the track) Seem a lot but in fact the kit has not so many part, just a few "big". 2 pages for the railway, 1 for both turret, 2 for the hull, 1 for the rest.
* 4 pages for frame. I will use lasercut
2) Laser cut.
6 A4 pages on 1mm, 1/2 pages on 0.5mm. There's just few parts missing to glue on 0.2mm. Most is for the main hull frame
Note all bold are included - and there's a lot !
3) Build.
Started by the frame (!) nothing special, parts fit well, a lot of sand papering. I decided too glue the 2 12.5mm box before glueing the top for easier access.
Important note, the bottom must be glued before the bottom side frame. I never worked with so much big parts, I decided to use spray glue instead (obviously not to do in the office but in the garage ;)) as ansercoll dry too fast.
Cut the side I'm going to add them next.
Bye
here a little kit I just got with my last order. I wanted to do something simple for ones, so here it is : 40's Armoured railway car Ob-3 by gpm in 1:25, with lasercut. By the way, kit cover shows bp1 when the lasercut is ob-3
So it's basically an armoured box on top of a railway car with 2 t-26 turrets, plus 2 more 12.5mm on the side.
How much ? kit is around 11.5€ as lasercut. Both for 20€
1) kit
Kit present itself in classic Gpm, A4 paper, 180g (0.22mm) Model is really simple - but still nice details - length is 28cm
* Instruction in polish
* Few colours pictures of a model
* 3 pages of diagrams, good size. Model is really simple. So far no complain
* 6 pages for parts plus some more on back of instruction (the track) Seem a lot but in fact the kit has not so many part, just a few "big". 2 pages for the railway, 1 for both turret, 2 for the hull, 1 for the rest.
* 4 pages for frame. I will use lasercut
2) Laser cut.
6 A4 pages on 1mm, 1/2 pages on 0.5mm. There's just few parts missing to glue on 0.2mm. Most is for the main hull frame
Note all bold are included - and there's a lot !
3) Build.
Started by the frame (!) nothing special, parts fit well, a lot of sand papering. I decided too glue the 2 12.5mm box before glueing the top for easier access.
Important note, the bottom must be glued before the bottom side frame. I never worked with so much big parts, I decided to use spray glue instead (obviously not to do in the office but in the garage ;)) as ansercoll dry too fast.
Cut the side I'm going to add them next.
Bye
Aucun commentaire:
Enregistrer un commentaire