these old models are quite striking, to my mind, their designers had real flair
the little rectangle cut in the bulkhead is to be able to manipulate it with a tweezers
if find that some extra bending on the edges at the bottom makes it easier to glue the seam
i usually glue in the bulkheads, then the strips that join the 2 pieces
this time i tried first gluing the strips, then pushing the bulkheads up against them
i find i have to cut the strips, once glued, so they will bend a little to enter the matching part of the fuselage
the spar in place, but not glued, which turned out to be lucky
the little rectangle cut in the bulkhead is to be able to manipulate it with a tweezers
if find that some extra bending on the edges at the bottom makes it easier to glue the seam
i usually glue in the bulkheads, then the strips that join the 2 pieces
this time i tried first gluing the strips, then pushing the bulkheads up against them
i find i have to cut the strips, once glued, so they will bend a little to enter the matching part of the fuselage
the spar in place, but not glued, which turned out to be lucky
Aucun commentaire:
Enregistrer un commentaire